Remux

D1302 MPEG RE-Multiplexer

The Fanamoj D-1302 Transport Multiplexer is new generation modular solution for MPEG-2/4 service multiplexing and SFN adaptation, particularly suited for DVB/MPEG transport distribution architectures. The Remux provides standard output transport interface DVB-ASI for interoperability across a variety of applications. With its DVB-ASI input and output interfaces, the Remux can be easily incorporated in any existing head end environment and support any digital turnaround architecture. The Remux’s robust, extensible and highly scalable design supports MPEG re-multiplexing functionality, including PID remapping and filtering, insertion of PSI/SI tables, PID multicast, service redundancy. This configuration not only reduces rack space and power requirements, but also simplifies network infrastructure while delivering a high-availability solution.

APPLICATIONS

• DVB Terrestrial Broadcast
• DVB Satellite
• CATV
• Mobile TV (DVB-H)
• Fixed and Mobile Contribution/Distribution
• Local Program Insertion
• Digital News Gathering
• Remote Education
• Single Frequency Networks

Key Features:

• Complying ISO13818 and EN300468 standard
• Real Time Linux Operating System
• Up to four RF DVBS/S2 input modules support MPEG-4
• Up to two independent ASI output ports (each one has a redundant port)
• Fully Web-based graphical user interface
• Front panel control for local operation
• Advanced management of PSI/SI tables, service and component filtering, and remapping
• Supporting whole PID mapping
• Component based re-multiplexing
• PCR modification, constrain PCR accuracy
• Automatic PID conflict resolution
• Support maximum number of programs per transport stream output
• Input TS analyzer for ETR290 priority level 1 error detection and monitoring (option)
• PRBS output on TS format
• Up to four ASI input ports, arbitrary input backup (option)
• Support other interfaces such as E3, STM1, IP over TS (MPE standard), TS over IP (RTP & UDP standard) (option)
• Support BISS Decryption.
• Remote Update
• 10 MHz and 1PPS inputs for SFN Adapter (option)

TECHNICAL CHARACTERISTICS INPUTS SECTION

ASI Input

Connector:	1 x BNC 75Ω (up to 4 ASI input option)
Standard:	DVB-ASI interface
Input Bit Rate:	Up to 214 Mbit/s ASI
Packet Length:	188/204 byte with Automatic adaptation, Burst or continues mode

L band Inputs

Tuner IC:	STB0899 (Baseband) & STB6100 (RF)
Standard:	DVBS / DVBS2
Connector:	4 x F type 75Ω
Frequency:	950-2150 MHz (1 KHz Step)
Input Level:	-25 ~ -70 dBm
Symbol Rate:	up to 45 Mbauds ,10 bauds Step (DVBS)
	up to 30 Mbauds ,10 bauds Step (DVBS2)
Modulation:	QPSK(DVBS) / QPSK,8PSK(DVBS2)
FEC Code Rate:	1/2, 2/3, 3/4, 5/6, 7/8 (DVBS)
	1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVBS2)
Roll Off:	0.25, 0.35 (DVBS) / 0.2, 0.25, 0.35 (DVBS2)
Frame Length (DVBS2 only):	Short/Normal
Pilot (DVBS2 only):	ON/OFF
Output bitrate:	up to 81 Mbps Per IRD
IRD Monitoring:	BER, C/N, Input Level, Freq Offset

Reference 10MHz input (SFN)

Connector: BNC
Input impedance: 50Ω

1PPS input (SFN)

Connector: BNC 75Ω (TTL level)
Rising and falling edge

OUTPUT SECTION

ASI Output

Connector:	5 x BNC 75Ω (2 independent TS each one has a redundant and 1 PRBS outputs )
Standard:	DVB-ASI interface
Output Bit Rate:	Up to 214 Mbit/s Per Channel, Burst or byte mode
System Interface:	ISO/IEC 13818-1 TS

Lband Loop Output

Connector:

4 x F type 75Ω

Control & Monitoring Interfaces

Local(Front Panel):	4 cursor, 2 Function key, 2x40 LCD, LEDs(indicate input Lock and output ready)
Remote :	10/100 Ethernet with SNMP(ver2) Agent & Web Server

GENERAL

Physical :	Rack 19"-1U - 4kg
Power Supply1:	85 - 265 VAC, 50 - 60 Hz
Power Supply2(redundant):	85 - 265 VAC, 50 - 60 Hz
Operating Temperature :	-10°C to +50°C
Storage Temperature:	-20°C to +55°C
Humidity:	95% Non-Condensing

Other options

GPS module (FNJ-B1008)
1 + 1 hot standby of input
Multiplexing/output circuit and control unit
Two independent ASI outputs (FNJ-BR1010)

Block Diagram

Front And rear panel scheme

Download PDF