Fly Away
Flyaway units are essentially the same technology and equipment as the automatic pointing vehicle-mounted satellite units, but installed into ruggedized, shippable waterproof cases. These units are designed to be transported to anywhere you need broadband connectivity and deployed within just a few minutes.
FNJ-DSPL01
Flyaway system is the best of the best. You will see quality engineering throughout this unit. The main case of
Flyaway systems include a shock mounted case for the rack-mountable device for wide range of application like satellite
DVB uplink , Ethernet router, VoIP appliance, VPN device,
wireless access point, or any other customer specified hardware. Flexible design provided high capability for this system for example with changing encoder module with IP2TS Module you can use it as a bridge
link to connect two IP based networks via satellite
link.
Applications
- Digital video Satellite up-link
- Ethernet router
- VoIP appliance,
- VPN device,
- Wireless access point
Key Components
HPA: KU-Band Solid State Power Amplifier (100W), Quick Disconnect Flexible Waveguide (GWT Offers its Power amplifier as a key device in satellite application)
Modulator: DVB-S/S2 up to 40MSPS (105MBPS);
Encoder: MPEG2, 4:2:0 & 4:2:2 SDI & Composite Video input
MPEG Re-multiplexer: (Optional)
IP2TS and TS2IP convertors: UP to 30MBPS (Optional)
LNB: 9.75 / 10.6 GHz dual band LNB (PLL optional)
Dish: 1.2 m, 3-petals Carbon Fiber with Aluminum tripod mount
Physical
Case 1: antenna petals, feed & feedarm;
Case 2: tripod mount;
Case 3: 19”x5RU or 19”x6RU (option) Equip with shock observer and wheels;
Case 4: 100W HPA.
Specifications
Encoder
- Video Inputs
SDI 270Mb/s
Composite(PAL/NTSC)
- Audio Inputs
4*AES3/EBU
2*SDI Embedded
2*Stereo/4*mono analog(Mic/line selectable)level internally selectable
- Encoding
Video
MPEG2 encoding: SP@ML,MP@ML(4:2:0), 422P@ML(4:2:2)
Bitrates: 2~15 Mbps(4:2:0), 2~50 Mbps(4:2:2)
Audio
MPEG1 Layer2 encoding PCM IIS format(stereo or dual mode)
48KHz, 44.1KHz and 32KHz Sampling
16 bit quantization
Bitrates(MAX.): 384 kbps/2ch
- OUTPUTS
ASI ISO/IEC 13818‐1 (Transport Stream)
Modulator (DVBS/S2)
- Modulation standard
DVB-S2
DVB-S2 compliant (EN 302 307)
CCM (Constant Coding and Modulation) support (ACM optional)
Modulation scheme: QPSK, 8PSK (16APSK and 32 APSK optional)
Inner coding
QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10 rates
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9 rates
Pilot: Yes/No
FECFRAME: Normal, Short
Base band shaping (Roll-off Factors): 0.35, 0.25, 0.20
Symbol Rate: 1 - 40 MSPS (step 1 Symbol)
DVB-S, DVB-DSNG
DVB-DSNG compliant (EN 301 210), DVB-S compliant (EN 300 421)
Modulation scheme: QPSK, 8PSK (16 QAM optional)
Inner coding
QPSK: 1/2, 2/3, 3/4, 5/6, 7/8 rates
8PSK: 2/3, 5/6, 8/9 rates
Base band shaping (Roll-off Factors): 0.35, 0.25
Symbol Rate: 1 - 40 MSPS (step 1 Symbol)
- Input
MPEG2: two ASI input BNC 75 Ω connectors & one DVB SPI D-type 25 way Connector
ASI support: 188 & 204 byte packets auto detection, burst mode
Continuous ASI rate: up to 200Mbps
Auto bitrate adaptation (when Rate Adaptation is ON)with PCR Re-stamping on input TS
- Output
Connector: N-Type 50 Ω
Center frequency: 950 to 1750 MHz (adjustable in steps of 50Hz)
Output level: -30 to +2dBm, ±0.4dB
Return loss > 14dB
Carrier Phase Noise:
@1 KHz < -75dBc/Hz
@10 KHz < -85dBc/Hz
@100 KHz < -95dBc/Hz
- Special features
10 MHz output with L-band signal (selectable)
24VDC, 1A output with L-band signal (selectable
Ability of changing symbol rate and bit rate
10MHz Reference input
Demodulator (Decoder)
- Output
Input frequency: 950 to 2150 MHz
Input signal level -25 to -65 dBm
LNB Remote power supply (0V/14V/18V with 22 kHz)
DVBS Symbol rates 1 to 45 MSPS
DVBS Code rate 1/2, 2/3, 3/4, 5/6, 7/8
DVBS2 QPSK Symbol rates 2 to 36 Msps
DVBS2 8PSK Symbol rates 2 to 30 Msps
DVBS2 Code rate
QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10 rates
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9 rates
ASI Input
- MPEG Decoder
Video Decoding:MPEG-2,
Audio-Decoding: MPEG-1, MPEG-2(LAYER II),
MPEG-4, AAC, AC3
Letterbox mode (16:9)
4 Stereo Audio-Out XLR/DIN, SubD
5.1 Surr. Sound to Stereo Conversion
- Common Interface
For 2 Conditional Access Modules (DVB-CI)
Support of all standard CAM
Monitor
- 4” Color LCD Video Screen with Brightness, Chroma, Tint (NTSC Only), and Contrast Controls
- Auto Detection of NTSC/PAL Signals with NTSC/PAL Indication LED
- Self-Powered Speaker System
- Audio Level Meters - Two High-Resolution 53-Segment Tri-Color LED Bar graphs
- Phase Indication LEDs for Metered Channel Pair
- Video Inputs - One Composite Video Input On BNC Connector
- Audio Inputs - Two inputs on XLR connectors
- Internal or External Speaker Switch (No Amplifier Needed)
- Headphone Jack (mutes speakers)
- Line-Level Analog Output of Selected Source on XLR Connectors
- SDI/AES Digital Version also Available (Option)
SSPA
- RF and Electrical
| Frequency Range |
14 - 14.5 GHz |
| Output Power(P1dB) |
49dBm / 80 watt |
| Output Power (Psat.) |
50dBm / 100 watt |
| Max Gain |
75dB |
| Gain Adjustment Range |
25dB |
| Gain Adjustment Resolution |
0.5dB |
| Gain Variation (Full Band) |
2.5dB |
| Gain slope |
0.02 dB/MHz |
| Gain Stability (Over temperature -20~+55) |
± 2 dB (without ALC) |
| Input SWR |
1.5 |
| Output SWR |
1.2 |
| 3rd Order intermodulation 5MHz,6dB back off from P1dB |
- 30dBc |
| Parabolic |
0.003ns/MHz |
| Ripple |
1.0 ns P-P |
| Noise Figure |
9 dB |
| RF Monitor |
- 50 ± 2dBc |
| AC Supply |
220/110 VAC |
| AC Current @ Psat(220VAC/110VAC) |
4.5/9.0 A |
- Mechanical
| RF Input Connector |
N-Type |
| RF Output |
WR-75 Flange |
| RF Output Monitor Connector |
N-Type |
| Dimension (Width-Height-Length) |
42 × 24 × 50 Cm |
| Weight |
35 Kg |
- Environmental
| Operating Temperature |
-20 ~ + 55 |
| Humidity |
%95 |
Download PDF